EOL: DS935Z and ZX935Z Series PIR Intrusion Detectors

DS935Z and ZX935Z Series PIR Intrusion Detectors
  • Motion Analyzer II processing
  • Motion Monitor
  • Self-test supervision systems
  • Field replaceable, pointable mirrored optics
  • Four coverage patterns
  • Three mounting options
  • Draft and insect immunity
  • Overview
    Dimensions: 10.8 cm x 7 cm x 4.6 cm (4.25 in. x 2.75 in. x 1.8 in.)
    Material: High impact ABS plastic enclosure
    Operating Temperature: -40°C to +49°C (-40°F to +120°F) For UL Certificated installations, 0°C to +49°C (+32°F to +120°F)
    Radio Frequency Interference (RFI) Immunity: No alarm or setup on critical frequencies in the range from 26 MHz to 950 MHz at 50 V/m.
    Height (recommended): 2 m to 3 m (6 ft to 10 ft)
    Location: Wall or corner
    Internal and Pattern Pointability: Coverage is adjustable -18° to +2° vertically.
    Alarm: DS935Z: Form reed relay rated at 3.0 W, 125 mA at 28 VDC for resistive loads and protected by a 4.7 Ω resistor in the common C leg.
    ZX935Z: Signal through POPIT data bus.
    Tamper: DS935Z: Normally-closed (with cover in place) tamper switch. Maximum current load is 25 mA.
    ZX935Z: Signal through POPIT data bus. Signaled as Missing.
    Trouble: DS935Z: Solid state output shorts to auxiliary power negative when activated. Tamper contacts rated at 28 VDC, 125 mA maximum.
    ZX935Z: Signal through POPIT data bus.
    Current Draw: DS935Z: 20 mA at 12 VDC
    ZX935Z: <0.5 mA nominal, 2 mA in alarm with LEDs enabled. Do not leave Walk Test LEDs enabled.
    Voltage (Input): DS935Z: 9 VDC to 15 VDC
    ZX935Z: Power comes from two-wire Zonex Bus.

    Images

     
  • Certificates (2)
    Title Type Language
    UL PDF
    UL PDF
     
  • Documents (4)
     
 

Accessories

B335-3 Swiveling low-profile mount

B335-3 Swiveling low-profile mount

Swiveling, low-profile, universal bracket for wall mounting. The vertical swivel range is +10° to -20°, while the horizontal swivel range is ±25°.

Commercial Type No.: B335-3
Product No.: 4.998.800.014

 
B338 Universal Ceiling‑mount Bracket

B338 Universal Ceiling‑mount Bracket

Swiveling universal bracket for ceiling mounting. The vertical swivel range is +7° to -16°, while the horizontal swivel range is ±45°.

Commercial Type No.: B338
Product No.: 4.998.800.282

 
 
OMB93-3 BARRIER COVRGE OPT MIRROR

OMB93-3 BARRIER COVRGE OPT MIRROR

Provides barrier coverage with an 11 m x 3 m (35 ft x 10 ft) pattern. Shipped in packages of three.

Commercial Type No.: OMB93-3
Product No.: 4.998.800.308

 
Lens, 70ft (21m), 3pcs

Lens, 70ft (21m), 3pcs

Provides long-range coverage with a 21 m x 3 m (70 ft x 10 ft) pattern. Shipped in packages of three.

Commercial Type No.: OMLR93-3
Product No.: 4.998.111.865