ICP-MAP5000-SKE MAP5000 mali komplet za EMEA

Commercial Type No.: ICP-MAP5000-SKE
Product No.: F.01U.333.227

ICP-MAP5000-SKE MAP5000 small kit for EMEA
  • Supports up to two multi-language touch screen control centers
  • Supports one LSN gateway module with up to 127 LSN devices
  • Eight supervised inputs and one unsupervised tamper input
  • Supports additional power supplies
  • Event reporting via Ethernet (optional)
  • Overview
    Minimum operating voltage in VDC 19
    Maximum operating voltage in VDC 29
    Rated voltage in VDC 28
    Minimum current consumption in mA 250
    Maximum current consumption in mA 500
    On-board inputs
    Maximum line resistance in Ω 100
    Outputs
    Maximum current consumption in mA per output 1000
    Relay outoputs
    Maximum operating voltage in VDC 30
    Maximum operating voltage in VAC 30
    Back‑up time Determined by battery capacity and system load. Consider time or capacity limits for recharging the batteries regarding local regulations or EN standards if needed.
    Dimension in cm (H x W x D) 14.6 x 21.6 x 5.5
    Weight in g 450
    Indicators Green LED for operating status
    Number of output modules
    Auxiliary output 1
    Power output 2
    Form C dry-contact relay output 2
    Number of devices
    LSN Gateway Modules 1
    Control Centers (touch screen keypads) 2
    Minimum operating voltage in VDC 16
    Maximum operating voltage in VDC 29
    Rated voltage in VDC 28
    Rated current in mA at 28 VDC
    Start-up 250
    Alarm 175
    Idle screen 100
    Dark idle screen 60
    Dimension in cm (H x W x D) 15.6 x 17.1 x 3.9
    Weight in g 363
    Housing material ABS plastic
    Color white textured
    Touch screen
    Type TFT‑LCD
    Diagonal in cm 14
    Aspect ratio 4 : 3
    Resolution in pixels 320 x 240
    Color depth 16‑bit color
    Backlight white LED with adjustable brightness (active and idle)
    Indicators 3 LEDs green: power yellow: fault red: alarm
    Connection type 4-wire Bosch data bus, 2 sets of terminals for daisy chain in/out wiring
    Maximum number of control centers (touch screen keypads) 2
    Minimum operating voltage in VDC 16
    Maximum operating voltage in VDC 29
    Rated voltage in VDC 28
    Maximum current in mA 1500
    Rated current in mA 75
    Maximum LSN line current in mA 300
    Maximum LSN AUX output current in mA 2 x 500
    Dimension in cm (H x W x D) 15.88 x 8.26 x 6.35
    Weight in g 365
    Housing material ABS plastic
    Color off-white
    Indicator Green power LED
    Cable requirements 0.6 mm – 1.0 mm (18 AWG - 22 AWG) solid or stranded; up to 1000 m line length; twisted type shielded
    Maximum operating voltage in VAC 230 (-15 %, + 10%)
    Minimum AC line frequency in Hz 47
    Maximum AC line frequency in Hz 63
    Minimum output voltage in VDC 16
    Maximum output voltage in VDC 30
    Minimum current consumption in mA 650 at rated load and 230 VAC
    Maximum current consumption in mA 100 at no-load and 24 VDC
    Efficiency at rated load in percent 85
    Battery
    Battery configuration in VDC 12
    Battery type Lead battery, maintenance - free
    Min. ampere hour rating in Ah 18
    Max. ampere hour rating in Ah 80
    Battery charge voltage in VDC 27.6 (with thermal compensation)
    Nominal battery charger output in A 4.85
    Maximum battery charger output in A 5
    Outputs
    Maximum sum of output power in W ≤ 109
    Maximum ripple of all voltage outputs in mV ≤ 250
    A and B output
    Type Supervised, independently short‑circuit protected
    Minimum output voltage in VDC 26
    Maximum output voltage in VDC 30
    Rated voltage in VDC 28 ± 1
    Rated current in mA (A or B) 2000
    Rated current in mA (sum of A and B) 3000
    Switched auxiliary output
    Type Supervised
    Minimum output voltage in VDC 24
    Maximum output voltage in VDC 30
    Rated voltage in VDC 24
    Rated current in mA 500
    Panel output
    Type Unsupervised
    Maximum output voltage in VDC 27.6
    Rated voltage in VDC 24
    Rated current in mA 500
    Trouble output dry contacts
    Maximum operating voltage in VDC 30
    Rated current in mA 1000
    Dimension in cm (H x W x D) 11.43 x 22.23 x 6.67
    Dimension in inch (H x W x D) 4.5 x 8.75 x 2.63
    Weight in g 590
    Weight in oz 20.8
    Indicators Green LEDs indicate: AC good Operation monitor 2x yellow LEDs indicate: BAT1/2 (on = missing battery, blinking = low battery)
    Number of inputs
    Tamper switch input 1
    Thermal compensation circuit* 1
    Dimension in cm (H x W x D) 65.8 x 44.3 x 19.35
    Dimension in inch (H x W x D) 25.9 x 17.4 x 7.6
    Weight in g 1566
    Material 1.5 mm (0.06 in.) cold rolled steel
    Color White
    Minimum operating temperature in °C -10
    Maximum operating temperature in °C 55
    Minimum storage temperature in °C -20
    Maximum storage temperature in °C 60
    Minimum relative humidity in % 5
    Maximum relative humidity in % 95
    Protection class IP30 IP31 (built into the MAP Panel Enclosure with an edge protection profile)
    Security level IK04 IK06 (built into the MAP Panel Enclosure with an edge protection profile)
    Environmental class II: EN50130-5, VdS 2110
    Usage Indoor

    Images

     
  • Certificates (6)
  • Documents (6)